Allow to automatically create a 3D step-skewed electrical machine. One can set either same skew angles and height for each slice or use equal parameters for each slice. Only need is 2D Maxwell Design and to fill the parameters of future machine

A lite-weight extension that allows for a static strength verification of non-welded components, made of steel or aluminum alloy, within ANSYS mechanical. It is based on the assessment of the static strength using local stresses demonstrated within the FKM-Guideline [1] and appropriately takes the effects of temperature, the state of stress, anisotropy as well as the decrease in material strength due to a change in dimensions into consideration.

Create an Envelope of Max/Min Stresses over all the time steps (substeps). User can either scope it to all the time steps or scope to certain time window

Refer to a simplified way to use the TCD (Theory of Critical Distances) approach. Exploit a mesh of specific dimensions to evaluate the stress condition in components which present notches and other stress concentration features (such as cracks, weld beads...)

The TU Delft COVID App standardized the CFD calculation setup of the behaviour of an infected patient which cause the spread of the virus. Default settings for the human expiratory activities (sneezing, coughing, speaking and breathing) enabling engineers and scientists with a basic level of fluid dynamics skills to perform reliable contagion risk calculations in customized environments.

Create an object to be able to apply a spatially varying tangential pressure

Calculate the stress safety based on a temperature dependent allowable stress values

Compute Predicted Mean Vote (PMV) and Predicted Percentage Dissatisfied (PPD) from the solution data and create a report containing the maximum and minimum values of PMV and PPD in the computational domain along with contour of PMV and PPD at different sections across the computation

This wizard allows predicting distortion in components during and after a thermal cut process

Easily calculate an average temperature or a surface thermal power output in a thermal analysis

With this extension, the Ansys temperature sensor function (COMBIN37 element for turning on/off incoming heat) can be easily configured on Mechanical.

Create an object to be able to apply (and visualize) a time dependent hydrostatic pressure